WiMo: Connecteurs Coaxial SMA

SMA connectors are used for device internal cables as well as external antenna connectors for small antennas. Most amateur radio handheld radios do use a SMA female connector. SMA connectors can be used up to frequencies of more than 14GHz, depending on the model of the connector. The SMA connectors offered here have a gold plated center conductor and nickel plated exterior.

For Wifi equipment (wireless LAN) often so called reverse polarity, or RP-SMA connectors are used. That means that the center conductor has an inversed polarity. Instead of a male conductor you find a female contact and vice versa. This leads to quite some confusion about what is a mâle and what is a femelle... Usually all connectors with an outside thread are called a femelle, all with a nut with inner thread are mâles, regardless of the polarity of the center conductor. On our website Wifi connectors this is explained in greater detail and with pictures.

Most of the connectors offered here are crimp connectors. That means that these connectors are not soldered but that the outer shield is pressed onto the shaft of the connector with a special tool. The center conductor is usally soldered. Of course we supply the required tools as well, please see Crimp tools.

If you want to crimp the connectors yourselves you will need also the information on the precise lengths to which a cable (outer isolation, shield and inner isolation) must be stripped. This information is to be found in the following document:

SMA mâle

42900 RG-58, à souder 4.53 ( 4.40) EUR Acheter

SMA mâle, Reverse SMA mâle

42901 RG-58, sertir 4.22 ( 4.10) EUR Acheter
42901.REV RG-58, sertir, Reverse 3.61 ( 3.50) EUR Acheter
42901.316 RG-316, RG-174, sertir 4.22 ( 4.10) EUR Acheter
42901.316REV RG-316, RG-174, sertir, Reverse 4.58 ( 4.45) EUR Acheter
42901.316LI RG-316, sertir, filet à gauche! 8.34 ( 8.10) EUR Acheter
42901.155 H-155, sertir 3.61 ( 3.50) EUR Acheter
42901.155REV H-155, sertir, Reverse 4.58 ( 4.45) EUR Acheter
42901.155LI H-155, sertir, filet à gauche 8.34 ( 8.10) EUR Acheter

Reverse SMA mâle pour Ecoflex-10 Nouveau

42098 Ecoflex-10 9.17 ( 8.90) EUR Acheter

SMA angled mâle, Reverse

42908.155REV H-155, sertir, 90° angled, Reverse 7.93 ( 7.70) EUR Acheter

SMA cable femelle

42902 RG-58, sertir 3.09 ( 3.00) EUR Acheter
42902.316 RG-316, sertir 3.71 ( 3.60) EUR Acheter
42902.316REV RG-316, sertir, Reverse 5.05 ( 4.90) EUR Acheter
42902.155REV H-155, sertir, Reverse 5.05 ( 4.90) EUR Acheter

SMA cable femelle, bulkhead mount

42906 RG-58, sertir 3.71 ( 3.60) EUR Acheter
42906.REV RG-58, sertir, Reverse 4.07 ( 3.95) EUR Acheter
42906.137 1.37mm cable, sertir 7.00 ( 6.80) EUR Acheter
42906.137REV 1.37mm cable, sertir, Reverse 7.21 ( 7.00) EUR Acheter
42906.155 H-155, sertir 4.58 ( 4.45) EUR Acheter
42906.155REV H-155, sertir, Reverse 4.58 ( 4.45) EUR Acheter
42906.316 RG-316, sertir 4.53 ( 4.40) EUR Acheter
42906.316 RG-316, sertir, Reverse 4.53 ( 4.40) EUR Acheter

SMA femelle, pour panneau

42903 à souder 3.50 ( 3.40) EUR Acheter

SMA Adaptateurs

SMA connecteur ff

42904 2x femelle 2.27 ( 2.20) EUR Acheter

SMA connecteur mm

42905 2x mâle 2.68 ( 2.60) EUR Acheter

Adaptateur Reverse-SMA / SMA

Chaque coté avec conducter centrale femelle!
42880 5.10 ( 4.95) EUR Acheter

Adaptateur Reverse SMA femelle/Reverse SMA mâle coudé 90°

42910.REV 90° coudé, Reverse 8.76 ( 8.50) EUR Acheter

Adaptateur SMA mâle/PL femelle

42874 5.46 ( 5.30) EUR Acheter

Adaptateur SMA femelle/PL mâle

42875 5.46 ( 5.30) EUR Acheter

Adaptateur SMA mâle/N femelle

42873 7.42 ( 7.20) EUR Acheter

Adaptateur SMA femelle/N mâle

42872 7.42 ( 7.20) EUR Acheter

Adaptateur SMA mâle/BNC femelle

42854 6.90 ( 6.70) EUR Acheter
42854.01 Version court 9.99 ( 9.70) EUR Acheter
42854.02 Version trés court, noire 12.36 (12.00) EUR Acheter

Connecteurs Coaxial

Serie SMA